Recommended products:Suoshi Chemical SAND PROFILE AGENT T-101

These sand texture agents are polyamide modified fluoride copolymer which can produce excellent
wear resistant matt powder coating. Compared with the competitive products, T-101 can provide good
cost, low dosage, good dispersion and gloss stability. T-101 is designed for good cost formulation ，
added amount 0.3-0.8%.

Typical physical data

Suggested formulation

Characteristics and application

Providing excellent hardness, scratch/friction resistance and smoothness

Silicon-free, not affect to re-coating.

Use level range is 0.1-0.3%. To acquire more fine texture, lower gloss powder, add lower dosage of

T-101. To acquire more coarse texture, add higher dosage of T-101.

In combined with organic clay will provide better cost and performance.

Coarse texture powder will relate to particle size and texture agent dosage.

Don’t add flow agent in the flat grained power coating. Combining silica is better. When produce semi-matt one, please combine with excessive texturing agent, flow agent and small quantity of matt agent (0.5%) in the formulation. Add barium sulfate as the filler.

Adding 0.2-0.8% very fine talcum powder can remove the problem of edge coverage.

Packaging and storage

Polyethylene lining, net weight 25KG caveat; stored in a cool and dry place to avoid

moisture absorption.In the < 30 ℃ is valid for two years at room temperature