Recommended products: Changfeng brand high performance water-based industrial coating water-based dispersant P-1800

Changfeng brand water-based dispersant P-1800 is a high molecular weight polyurethane water-based dispersant with excellent wetting ability and deflocculation properties for pigments. It is particularly suitable for high-performance water-based industrial coatings and does not contain VOC.

Chemical Composition

P-1800 is an aqueous solution of polyurethane polymer, non-ionic, excellent for dispersing carbon black and organic pigments.

Characteristic Data

The following data are typical, but should not be considered as specifications

Performance characteristics

P-1800 is a highly efficient wetting and dispersing agent. In high-performance water-based coatings, it can wet, disperse and stabilize pigments, prevent pigment sedimentation and flocculation, and thus extend the service life of coatings and color pastes. This product helps to improve the gloss of the coating film and reduce haze, especially the carbon black paste prepared from it, which has better color development and storage stability. It is not affected by pH value during use.

Usage and dosage

To achieve the best dispersion effect, P-1800 should be added slowly under stirring, and then the pigment should be added. In a resin-free system, please mix the additives and water evenly before adding the pigment.

Titanium dioxide 3-6%

Organic pigment 15-70%

Carbon black 40-100%

The above recommended dosage is for reference only, and the optimal dosage needs to be determined through a series of tests.

Application areas

High-performance water-based industrial coatings, such as original automotive paint, automotive repair paint, and furniture paint.

Packaging and storage

It is recommended to store and use below 40℃. Please cover the bottle cap tightly after use to maintain the activity of the product and prevent excessive evaporation of water. If the surface of the product is separated, it may become turbid or stratified when transported or stored at a temperature below 0℃. Heat to 20℃ and stir before use.

Safety and precautions

It is recommended to wear laboratory safety protection before operation. If it is accidentally splashed into the eyes, clothes, or skin, please rinse with plenty of water in time and seek medical attention immediately.

Currently, this type of product has been stationed in the excellent material warehouse. If you need samples, please apply for samples according to the characteristics of the product. Changfeng brand high-performance water-based industrial coating water-based dispersant P-1800.