DAPRO® AP 7010S

Water-based defoamer

Product Introduction

DAPRO AP 7010S is an economical, general-purpose water-based defoamer with very good long-term defoaming effect.

Product Features

composition：Mineral oil and wax mixture

Appearance：Milky white to light amber waxy liquid

Active ingredients：≧ 97 %

density：820 - 860 kg/m3 （25 °C）

Viscosity：600 - 4000 mPa.s （25 °C）

Solubility：Poor emulsification in water will result in unstable emulsions and rapid formation of a paste-like appearance

The above are product characteristics under normal conditions and are not suitable for special purposes.

Applications

 Latex paint

Other water-based systems with good emulsification performance 

Main features

DAPRO AP 7010S is particularly recommended for use in systems with good emulsification effects, such as emulsions containing surfactants and their emulsion coating systems. DAPRO AP 7010S is based on mineral oil and wax, and contains a small amount of special silicone. Due to its special preparation process, it has very good product storage stability. DAPRO AP 7010S is not prone to separation or sedimentation after long-term storage

Usage

It is recommended to add at least half of the total amount of DAPRO AP 7010S to the grinding slurry part, and the rest is added during the paint mixing stage.

Amount of addition

he optimal amount of addition should be determined according to the specific situation. Generally, adding 0.2 - 0.5% of the total amount of the formula can achieve the best effect. Operation and safety Each product has detailed information on operation and safety.

Storage conditions

Keep away from heat and ignition sources. Place in a cool and ventilated place, and keep the container tight. The storage environment is above 4 °C (40 °F).