
Recommended products: Water-based drying agent FED-080 effectively reduces the yellowing of the paint film
2025-02-07 16:34
Water-based drier FED-080 is a new generation of water-based composite drier. As a composite drier, it not only has good fast drying properties but also can effectively increase the hardness of the paint film after it is actually dried, and can effectively reduce the yellowing of the paint film. It solves the problem of "dehydration" caused by hydrolysis due to long-term storage in water-based systems, and has good incorporation properties. It is particularly suitable for white paint or light-colored paint.
Water-based additives
Feature data
The following data are typical but should not be considered as specifications
Performance characteristics
◎ It can make the system dry quickly
◎ Excellent hydrolysis resistance
◎ No grinding required, good miscibility with various resin systems
◎ It can be used in a variety of systems, such as water-based epoxy esters, water-based alkyds and other air-drying oxidative cross-linking systems
◎ It can be used in varnishes and paints, especially in white or light-colored paints
◎ It can also be used in ink systems and high-solid resin systems
◎ Very low VOC
Usage and dosage
Please stir the product before use. It should be added at 0.02-0.3% of the metal content (relative to the solid resin). It is very important to determine the appropriate amount in the paint formula. If the amount is not enough, it will affect the drying speed and hardness of the coating. However, excessive use will also affect the appearance of the paint film, such as orange peel or loss of gloss. Therefore, the appropriate amount should be determined after actual experiments.
Packaging and storage
It is recommended to store and use it below 40℃. Please cover the bottle cap tightly after use to maintain the activity of the product and prevent excessive evaporation of water. If the surface of the product is stratified, it is normal. Stir it well before use, and it will not affect the product performance.
Safety and precautions for use
It is recommended to wear laboratory safety protection before operation. If it splashes into eyes, clothes or skin, please rinse with plenty of water and seek medical attention immediately.
MORE HZinfo
- BASF Inaugurates New NPG Plant at Zhanjiang Verbund Site and Launches NEOL® NPG with Reduced Product Carbon Footprint
- BASF’s Intermediates division has inaugurated a new neopentyl glycol (NPG) plant at the Verbund site in Zhanjiang, China.
-
2025-10-20
- Recommended products:Fenghong New Materials Polyamide Wax PA-8600 with Excellent Thixotropic Properties
- PA-8600 is a specially modified polyamide wax micro-powder, mainly used as a thixotropic additive for heavy-duty anti-corrosion coatings. It can fully disperse in coating systems
-
2025-10-20
- LOUIS LONG | Premium Editorial Style | Embrace An Artful, Natural Home with Mid-Century Charm
- When minimalism is kissed by light, when silent spaces begin to breathe—this is the most touching annotation of life in high-end magazine style.
-
2025-10-20